Spare Parts

If you broke something, or need extras you can purchase new ones buy contacting support@terralabgis.com. Alternatively, browse the spare parts in the:

GPS Unit

The GPS box is a requirement of any STA logger system. It includes:

• Light grey polycarbonate, IP65 case (dust/hose proof)
• IP67 connector
• WiFi 802.11g/b/n 2.4 GHz
• 2200mAh Lithium Ion battery
• Front facing LCD
• USB A charge cable (approximate charge time from empty is 8 hours)
• GNSS services: GPS, GALILEO, SBAS (WAAS, EGNOS, MSAS, GAGAN) where available
• Recommended operating temperature: -20°C – 40°C
• Charging temperature: 0°C – 40°C (should never be charged in extreme cold or heat)
• Storage temperature: -20°C – 50°C
• Charging cable included.

Solo shut off valve attachment

Includes element which is triggered by the Solo shut-off valve and 3-way rocker switch in an ergonomic position for categorising weeds. A cable connects the attachment to the GPS unit which is mounted via backpack straps.

• Made from MJF PA12 Nylon (black ABS used for rush orders).
• 304 stainless steel hardware (screws and springs).
• IP67 connector.
• 1600mm cable (can be customised upon request).

QuikSpray Turbo400 attachment

Includes trigger mechanism designed to fit in the groove behind the trigger of the Turbo400 applicator. A short cable connects it to the separate 3-way rocker switch (if included) or GPS unit.

• Made from MJF PA12 Nylon (black ABS used for rush orders).
• 304 stainless steel hardware (screws and springs).
• IP67 connector.
• 300-350mm cable (can be customised upon request).

Hudson 38505 Ges heavy duty spray gun attachment

Includes trigger mechanism designed to fit behind the trigger of the Hudson applicator. A short cable connects it to the separate 3-way rocker switch (if included) or GPS unit.

• Made from MJF PA12 Nylon (black ABS used for rush orders).
• 304 stainless steel hardware (screws and springs).
• IP67 connector.
• 300-350mm cable (can be customised upon request).

TeeJet AAB30L attachment

Includes trigger mechanism designed to fit above the trigger of the TeeJet applicator. The mechanism is actuated by a stainless steel connector which attaches to the TeeJet trigger. A short cable connects it to the separate 3-way rocker switch (if included) or GPS unit.

• Made from MJF PA12 Nylon (black ABS used for rush orders).
• 304 stainless steel hardware (screws and springs).
• IP67 connector.
• 300-350mm cable (can be customised upon request).

Hose clamps for high-volume applicators

Clamp set designed to attach the GPS unit to the hose immediately below the spray gun. Suits all high-volume applicators with a 3/8 hose.

• Clamps for fitting to Supaslip 3/8 hose.
• Made from MJF PA12 Nylon (black ABS used for rush orders).
• Neoprene foam insert to reduce slipping.
• 304 stainless steel hardware.

Trigger guard mount

Clamp and click set designed to attach the GPS unit to the trigger guard of the Turbo400 spray applicator.

• For fitting to QuikSpray Turbo400 spray applicators.
• Made from MJF PA12 Nylon (black ABS used for rush orders).
• 304 stainless steel hardware.

3-way rocker switch for high-volume applications

• 304 stainless steel hardware.
• IP67 connector.
• 200 mm cable.

Other accessories

USB charging cable

Configuration cable

Backpack fixings (snaplocks and bungee cord)

Contact support@terralabgis.com for pricing.